Linecast
Help & frequently asked questions
What the app does
Linecast is a teleprompter for people who film themselves, and it times your script the way a studio times a
show. Every paragraph is a cue with its own length, so you know how long the script runs, which part is long, and how
fast to read to land on the length you want. Rehearse a script once and Linecast keeps your own pace: the timing is
then yours, and the text scrolls the way you speak. The text runs past a reading line near the top of the screen,
close to the camera.
Getting started
- Open a script. The list starts with a practice script, “Welcome to Linecast”. To add your own,
tap + and choose New script, or paste a script into an empty list.
- See its timing. The top of the script shows its length, the cues and the pauses. Tap
Target to set the length you want; Linecast says how far over or under you are, how many words
to cut or add, and the speed that fits (“Read at 155”).
- Rehearse. Tap Rehearse, then Start rehearsal. Read each cue
out loud at your own speed and tap Cue read when you finish it. At the end, Keep this
pace: the script now shows its real length, and the prompter scrolls each cue at the speed you read
it.
- Read. Tap Read. After 3-2-1 the text scrolls; read the line held by the two
small marks at the screen’s edges.
- Pause and move. Tap the text to pause and again to carry on. While paused, the arrows go back or
on by one sentence, minus and plus change the speed, and Aa opens the text, reading line, glass
rig and pause settings. Dragging the text moves it too.
Questions
What is a cue?
A paragraph. Leave an empty line between paragraphs (or tap New cue above the keyboard) and each
one is timed on its own. In the script, Running order lists the cues with their start time and
length; tap one to start reading there. In the prompter, the thin bar along the top shows the cues, each as long as it
takes to read: tap a segment to jump to it. “Cue 02/06” and “Out 0:58” say where you are and how long is left.
What does // do?
It is a pause mark. Type // with a space on each side where you want a breath, or tap
Pause // above the keyboard. At a steady speed the text waits there for 1.5 seconds, and the timing
counts it. The two slashes in a web address are not a pause. You can turn pauses off under Aa.
What is the read-through at the end?
When the text reaches the end, Linecast shows how long you took against the plan (and the target, if you set one),
and each cue’s difference, so you see where you rushed and where you dragged. The last read-through stays with the
script.
What is a rehearsal?
A way to time a script with your own voice instead of a guess. Open the script, tap Rehearse and
read each cue out loud; tap Cue read after each one. Linecast times every cue. The two buttons on the
left go back a cue (to read it again) and pause the clock. When you keep the result, the top of the script says
Your pace instead of Estimate, the running order uses the times you really took,
and the prompter moves faster through the cues you read quickly and slower through the ones you took your time over.
No microphone is used and nothing is recognised, so it works in every language and without a connection.
If you rewrite a cue later, that cue is an estimate again (its time shows a “~”) until you rehearse once more.
Minus and plus in the prompter move your whole pace a little; every cue keeps its share. To go back to the plain
estimate, open the script’s ⋯ menu and choose Forget rehearsed pace. Cues tapped
through without reading are not counted.
What does the speed mean?
Words per minute. Most people read aloud at 120 to 160. For a script you have not rehearsed, the speed is one
number for every script and is remembered for next time. A rehearsed script keeps its own pace.
Can I hold the iPhone on its side?
Yes, in the prompter and on the record screen: turn the phone and they turn with it, for a phone on a tripod and a
wide video. On the record screen the script then sits in a column against the edge the front camera is on, with the
controls along the other edge. While a take is recording the screen stays as it is. The list of scripts and the editor
stay upright. An iPad turns everywhere.
I use a teleprompter glass. How do I flip the text?
Pause, tap Aa and choose Glass rig: Mirror flips the text left
to right for a beam-splitter glass; Upside down is for rigs that show the screen through a mirror;
Both does both. Set for reading from 2 m makes the text large for a rig across the
room.
How does recording work?
With Pro, open a script and tap Record. The camera fills the screen and the script runs in a strip
right under the lens, with the running order above it and the take’s clock against the plan below it. The round red
button starts and stops a take; the text starts with it. Each take is saved to Photos with sound and also kept in
Linecast. The script is never in the video. If a call or another app interrupts a take, Linecast stops, keeps the take
up to that moment, and offers to pick up at the cue you were on in a new take, or to start again from the top.
How does voice scroll work?
With Pro, turn on Voice scroll under Aa. The text follows what you say instead of
moving at a fixed speed. When you stop, it waits (“Waiting for you”); when you skip ahead or go back, it looks for
your place in the whole script and says “Found your place”. Speech is recognised on your device only; nothing is
sent anywhere. The language is set per script (the … menu in the script, Device language by default). Settings lists
the languages your device can recognise. If a language has no on-device model, or speech recognition is turned off,
Linecast says so and scrolls at a steady speed.
Can I use a keyboard or a pedal?
Yes, with Pro: turn on Keyboard and pedal remote under Aa. Space pauses and
resumes, ↑ and ↓ change the speed, ← and → go to the previous or next sentence, Page Up and Page Down jump a
paragraph. Most Bluetooth page-turner pedals send arrow or page keys.
Where are my takes?
Tap the film button at the top of the script list. Each take shows its first frame, its length and how it ran
against the plan, cue by cue. Touch one to watch it; swipe left to share or delete it. Deleting a take in Linecast
leaves the copy in Photos, and deleting it in Photos leaves Linecast’s copy.
Which files can I import?
With Pro: plain text (.txt), Markdown (.md) and RTF (.rtf), from + › Import.
Formatting is removed; only the words are kept. You can also paste text into a script.
Can I undo deleting a script?
Yes: right after you delete one, tap Undo at the bottom of the list.
Sounds and haptics
Linecast plays a soft tick for 3-2-1 and a short tone at the end, in the prompter only. It never plays a sound
while you record or while voice scroll listens, and the silent switch mutes it. Sounds and haptics each have their own
switch in Settings.
Why did it ask for the camera, microphone or speech recognition?
Only when you use a feature that needs them: camera and microphone when you open Record, speech recognition when
voice scroll starts, and Photos (add only) when the first take is saved. If you said no, you can turn access on in
the Settings app under Linecast, or read without filming.
What is free, and what is Pro?
Free: up to three scripts, the whole prompter and all of the timing (cues, target length, pauses, read-through).
Linecast Pro is a one-time in-app purchase that adds recording, voice scroll, the keyboard and pedal
remote, unlimited scripts and file import. There are no ads and no subscription.
I paid but it is still locked
Open Settings (top left in the script list) and tap Restore Purchase, signed in
with the Apple Account you bought with.
Can I get a refund?
Refunds are handled by Apple: reportaproblem.apple.com.
What data is collected?
None. There is no account and no ads, and the app does not use the network apart from the App Store for the
purchase. Scripts and takes stay on your device; videos go to your photo library. See the Privacy
Policy.
Still stuck?
Email hayriodabas@gmail.com.
Linecast: Teleprompter
Ayuda
- Cada párrafo es un bloque con su propia duración. Arriba del guion ves la duración total; toca Objetivo para fijar la que quieres y Linecast te dice cuánto sobra o falta y a qué velocidad leer.
- Toca Leer. Tras 3-2-1 el texto avanza hacia la línea de lectura. La barra de arriba muestra los bloques: toca uno para saltar a él. Toca el texto para pausar; las flechas van una frase atrás o adelante.
- Escribe // (con un espacio a cada lado) donde quieras respirar: a velocidad fija el texto espera 1,5 segundos. Al terminar, el resumen de lectura compara cada bloque con el plan.
- Toca Ensayar, lee cada bloque en voz alta a tu velocidad y toca Bloque leído al terminarlo. Con Guardar este ritmo el guion muestra su duración real y el texto avanza en cada bloque a la velocidad a la que lo leíste. No usa el micrófono. En el iPhone, el teleprompter y la grabación también giran a horizontal.
- Pro (compra única, sin suscripción): grabación con el guion justo debajo de la cámara (el texto nunca sale en el vídeo); desplazamiento por voz reconocido en el dispositivo, que te espera y vuelve a encontrar tu sitio; teclado Bluetooth o pedal; guiones ilimitados e importación de .txt, .md y .rtf.
- ¿Pagaste y sigue bloqueado? Ajustes › Restaurar compra. Sin cuenta, sin anuncios, no se recopilan datos.
Linecast: Teleprompter
Ajuda
- Cada parágrafo é um bloco com a própria duração. No topo do roteiro você vê a duração total; toque em Meta para definir a que quer, e o Linecast diz quanto sobra ou falta e em que velocidade ler.
- Toque em Ler. Depois de 3-2-1 o texto sobe até a linha de leitura. A barra no topo mostra os blocos: toque em um para ir até ele. Toque no texto para pausar; as setas voltam ou avançam uma frase.
- Digite // (com um espaço de cada lado) onde quiser respirar: em velocidade fixa o texto espera 1,5 segundo. No fim, a releitura compara cada bloco com o plano.
- Toque em Ensaiar, leia cada bloco em voz alta na sua velocidade e toque em Bloco lido ao terminar. Com Guardar este ritmo, o roteiro mostra a duração real e o texto rola em cada bloco na velocidade em que você leu. Não usa o microfone. No iPhone, o teleprompter e a gravação também giram para a horizontal.
- Pro (compra única, sem assinatura): gravação com o roteiro logo abaixo da câmera (o texto nunca aparece no vídeo); rolagem por voz reconhecida no aparelho, que espera você e reencontra o seu lugar; teclado Bluetooth ou pedal; roteiros ilimitados e importação de .txt, .md e .rtf.
- Pagou e continua bloqueado? Ajustes › Restaurar compra. Sem conta, sem anúncios, nenhum dado coletado.
Linecast : Prompteur vidéo
Aide
- Chaque paragraphe est un repère avec sa propre durée. En haut du texte s’affiche la durée totale ; touchez Objectif pour fixer celle que vous voulez, et Linecast indique l’écart et la vitesse qui tombe juste.
- Touchez Lire. Après 3-2-1, le texte monte vers la ligne de lecture. La barre du haut montre les repères : touchez-en un pour y aller. Touchez le texte pour la pause ; les flèches reculent ou avancent d’une phrase.
- Tapez // (avec une espace de chaque côté) là où vous voulez respirer : à vitesse fixe, le texte attend 1,5 seconde. À la fin, le bilan compare chaque repère au plan.
- Touchez Répéter, lisez chaque repère à voix haute à votre vitesse et touchez Repère lu quand il est fini. Avec Garder ce rythme, le texte affiche sa vraie durée et défile sur chaque repère à la vitesse où vous l’avez lu. Le micro n’est pas utilisé. Sur iPhone, le prompteur et l’enregistrement tournent aussi en paysage.
- Pro (achat unique, sans abonnement) : enregistrement avec le texte juste sous la caméra (il n’apparaît jamais dans la vidéo) ; défilement à la voix reconnu sur l’appareil, qui vous attend et retrouve votre place ; clavier Bluetooth ou pédale ; textes illimités et import de .txt, .md et .rtf.
- Payé mais toujours verrouillé ? Réglages › Restaurer l’achat. Pas de compte, pas de publicité, aucune donnée collectée.
Linecast: Teleprompter
Hilfe
- Jeder Absatz ist ein Cue mit eigener Länge. Oben im Skript steht die Gesamtlänge; tippe auf Ziel, um die gewünschte Länge einzustellen, und Linecast zeigt die Abweichung und das passende Tempo.
- Tippe auf Lesen. Nach 3-2-1 läuft der Text zur Leselinie. Die Leiste oben zeigt die Cues: Tippe auf einen, um dorthin zu springen. Tippe auf den Text zum Anhalten; die Pfeile gehen einen Satz zurück oder vor.
- Schreib // (mit je einem Leerzeichen davor und danach), wo du atmen willst: Bei festem Tempo wartet der Text dort 1,5 Sekunden. Am Ende vergleicht der Durchlauf jeden Cue mit dem Plan.
- Tippe auf Proben, lies jeden Cue laut in deinem eigenen Tempo und tippe auf Cue gelesen, wenn du fertig bist. Mit Dieses Tempo behalten zeigt das Skript seine echte Länge, und der Text rollt bei jedem Cue so schnell, wie du ihn gelesen hast. Das Mikrofon wird nicht benutzt. Auf dem iPhone drehen sich Prompter und Aufnahme auch ins Querformat.
- Pro (einmaliger Kauf, kein Abo): Aufnahme mit dem Skript direkt unter der Kamera (der Text ist nie im Video); Sprachsteuerung auf dem Gerät, die auf dich wartet und deine Stelle wiederfindet; Bluetooth-Tastatur oder Pedal; unbegrenzt viele Skripte und Import von .txt, .md und .rtf.
- Gekauft, aber gesperrt? Einstellungen › Kauf wiederherstellen. Kein Konto, keine Werbung, keine Daten erfasst.
Linecast: Teleprompter
Yardım
- Her paragraf kendi süresi olan bir kesittir. Metnin üstünde toplam süre görünür; istediğiniz süreyi girmek için Hedef'e dokunun, Linecast ne kadar uzun ya da kısa olduğunu ve hangi hızda okumanız gerektiğini söyler.
- Oku'ya dokunun. 3-2-1'den sonra metin okuma satırına doğru akar. Üstteki çubuk kesitleri gösterir: birine dokunup oraya atlayın. Duraklatmak için metne dokunun; oklar bir cümle geri ya da ileri götürür.
- Nefes almak istediğiniz yere // yazın (iki yanında birer boşlukla): sabit hızda metin orada 1,5 saniye bekler. Sonunda okuma özeti her kesiti planla karşılaştırır.
- Prova yap'a dokunun, her kesiti kendi hızınızda sesli okuyun ve bitirince Kesit okundu'ya dokunun. Bu hızı kullan derseniz metin gerçek süresini gösterir ve her kesitte sizin okuduğunuz hızda akar. Mikrofon kullanılmaz. iPhone'da prompter ve çekim ekranı yan çevrildiğinde de çalışır.
- Pro (tek seferlik satın alma, abonelik değil): metin kameranın hemen altındayken video çekimi (yazı videoda görünmez); cihazda tanınan, sizi bekleyen ve yerinizi yeniden bulan sesle kaydırma; Bluetooth klavye ya da pedal; sınırsız metin ve .txt, .md, .rtf içe aktarma.
- Satın aldınız ama kilitli mi? Ayarlar › Satın Alımı Geri Yükle. Hesap yok, reklam yok, veri toplanmaz.